Поиск

Фильтр по Type

Product Support Center

Find the latest firmware, software, drivers, manuals, brochures. specifications and technical literature.

Learning Center

Learn how to use our equipment to troubleshoot system anomalies, provide measurement insights, debug EMI, and more.

TekTalk Community Forum

Ask questions, explore products and solutions and discuss with other TekTalk members, including Tektronix engineers.

Результаты поиска

1 - 10 из 467

Сортировать по

Datasheet
Passive Voltage Probes

The passive voltage probes datasheet provides an overview of the product features, important specifications, and ordering information.

51W-26151-10 | Date: Friday, December 02 2022
Datasheet
High-voltage Differential Probes

The high-voltage differential probes datasheet provides an overview of the product features, important specifications, and ordering information.

51W-11195-15 | Date: Wednesday, January 11 2023
Faq
What is the maximum floating voltage for a single-ended probe?

A single-ended probe is a ground-referenced probe. The alligator clip connected to the side of the probe is a ground reference. This allows the scope and device under test have a common reference to ground. Typically, a single-ended probe should only …

Created Date:Saturday, August 10, 2019
Faq
Single-Ended probes are mentioned for HDMI intra-pair skew measurements. Can we use the probe P7330 for single ended measurements?

The differential input range of P7330 is ± 2.5V, but the typical HDMI signal voltage range is 2.9V to 3.3V, so it is not recommended to use the P7330 for Single ended measurements.NOTE: this applies to testing under CTS1.0,1.1,1,2 only.

Created Date:Tuesday, June 18, 2019
Datasheet
Model 5808 Single-Pin Kelvin Probes

The Model 5808 Single-Pin Kelvin Probes are two single fixed-pin probes. Each probe has source and sense leads and color-coded safety banana plugs. They are designed for applications that require Kelvin resistance measurements with the convenience of …

PA-967C | Date: Sunday, January 01 2017
Technical Document
Making Single-ended Measurements with a Differential Probe

This paper will examine the use of differential probes in making single-ended measurements on differential signals and consider measurement issues that arise when making such measurements.

60W-18344-0 | Date: Wednesday, June 22 2005
Datasheet
Passive Voltage Probes

60W-15106-2 | Date: Wednesday, October 20 2010
Faq
Will an Active Differential probe support single ended measurements?

Active Differential Oscilloscope probes can be used to make single ended earth ground referenced measurements by connecting the (-) input to earth ground, and (+) input to signal.While suitable in many applications, single-ended measurements can …

Created Date:Tuesday, June 18, 2019
Faq
Which probes are recommended for SATA testing?

To test for SATA compliance, there is need for single ended and differential probing. The Differential skew and AC common mode measurements need a single ended probe. The Differential output voltage and Unit interval measurements need a differential …

Created Date:Tuesday, June 18, 2019
Datasheet
Active Power Rail Probes

The TPR1000 and TPR4000 datasheet provides an overview of the product's features, important specifications, and ordering information.

51W-61491-6 | Date: Thursday, April 25 2024